ABS Fusion+ Grey – 1.75mm – 750g

$59.65

In collaboration with Polyscope Polymers, Innofil3D developed an ABS filament which is engineered for 3D-printing. With ABS Fusion+ we offer an engineering filament which is optimized for 3D-printing.

Out of stock

SKU: ABSF-0223a075 Category:

Description

Filaments from the Professional Series give 3D printing professionals the competitive edge: improve productivity (reduce printing time, shorter innovation cycle), lower costs and high performance materials.

ABS Fusion+ made with Polyscope XILOYTM 3D is an engineering filament which has been optimized for 3D-printing.

This special grade has been developed in collaboration with Polyscope Polymers, an expert in enhancing polymer behavior with Styrene Maleic Anhydride (SMA).

Polyscope is renowned for its material solutions in the automotive industry. The properties of ABS Fusion+ are:

  • Chemical resistance
  • High heat resistance
  • Low warping
  • Compatible with INNOSOLVE PVA
  • Tough

ABS is a thermoplastic which is used in many applications.

Although ABS has been classified as a standard material in 3D-printing it used to be very challenging to process, until now. We managed to develop an ABS grade which can be directly printed on glass without any fluids or tape and has a higher success rate of prints due to extreme low warping.

To provide users with valuable information we have collected data regarding the mechanical properties of the 3D-printed specimens according to the ISO standards.

Quality

We select the best raw materials available from renowned suppliers.

Dedicated people, highest standards.

Production on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.

It will perform as expected, every time.

All our products are 100% traceable to the source.

Tips & tricks

PRINT TEMP | 464 – 500°F (240 – 260°C)

PRINT SPEED | 40 – 80 mm/s

BED TEMP | 212 – 230°F (100 – 110°C)

FILL DENSITY | 20%

BED ADHESION | Clean Glass*

FAN SPEED | 0% (Max 25%)

TOP/BOTTOM THICKNESS | 0.8 – 1.0

LAYER HEIGHT | 0.1 – 0.2 mm

* for easy removal of object smear a few drops of alcohol between the glass and object after printing.

Click Here to see the ABS Fusion Technical Data Sheet PDF

Additional information

SKU

ABSF-0223a075

Product

ABS Fusion+ Grey – 1.75mm – 750g

Color

Grey

Product Weight

26.5 oz (750g)

Diameter

1.75mm

RAL

N/A

Reviews

There are no reviews yet.

Be the first to review “ABS Fusion+ Grey – 1.75mm – 750g”

Your email address will not be published. Required fields are marked *